5
→
Combustible Gas Detectors
Combustible gas detection for hydrocarbon, solvent and process safety hazards.
Browse 5 items →Fixed Gas Detection in India
Fixed detectors, transmitters and plant gas monitoring systems. This page is structured for buyers comparing Fixed Gas Detection by application, hazard type, operating environment, certification need and service requirement. Detection Technology helps with consultation, product selection, supply, installation, commissioning and ongoing support.
ISO 9001:2015
30+ Yrs Field Expertise
Fast India Supply
Calibration & AMC
Sub Categories
Explore Fixed Gas Detection by system family
5
→
Toxic Gas Detection
Toxic gas detectors and sensor modules for plant safety and exposure control.
Browse 5 items →
2
→
VOC Gas Detection
VOC monitoring for solvents, chemicals and hazardous process areas.
Browse 2 items →
0
→
Open Path Gas Detection
Open path gas detection for perimeter, storage and process-area coverage.
Browse 0 items →Products Catalog
Toxic Gas Detection Products
5 products
DT TOX (Color)
DT TOX Fixed Toxic Gas Detector (Color Display)
Fixed toxic gas detector measuring oxygen and toxic gases with color display, internal diagnostics, 4-20mA and RS-485.
Target Hazards: Toxic Gase...
Display: High-resolution f...
DT TOX (LCD/LED)
DT TOX Fixed Toxic Gas Detector (LCD/LED Display)
Fixed toxic and oxygen detector with LCD/LED display, self-diagnostics, 4-20mA loop and RS-485 Modbus output.
Gases Monitored: Oxygen (O...
Display: Industrial LCD/LE...
GQ-CE8900
GQ-CE8900 Intelligent Toxic Gas Detector
Intelligent toxic gas detector adopting smart sensor technology with automated sensor life tracking and real-time fault diagnosis.
Sensor Intelligence: Smart...
Diagnostics: Real-time fau...
SI-100 Toxic
SI-100 Fixed Toxic & Oxygen Gas Detector
Fixed gas detector for oxygen and toxic gases with digital LCD display, self-diagnostics, 4-20mA loop and RS-485 output.
Target Gases: Oxygen (O₂),...
Display: Digital Backlit L...
D-GUARD NDIR
D-GUARD 2-Wire Loop Powered NDIR Methane & CO2 Detector
World-leading 2-wire loop powered NDIR detector for methane and CO2, reducing power supply, cable diameter and barrier costs.
Technology: Ultra-Low Powe...
Wiring Architecture: True...
Applications
Where Fixed Gas Detection is used
Common sectors include Oil and gas, Petrochemical, Chemical, Pharma, Steel, Mining, Automotive. Final product selection should be verified against gas hazard, area classification, alarm philosophy and service access.
TECHNICAL & REGULATORY FAQs
Engineering FAQs: Fixed Gas Detection
Key compliance, sensor technology, mounting elevation, and calibration answers for plant engineers and safety managers.
What are the mounting elevation rules for fixed gas detectors based on vapor density?
Mounting elevation strictly follows gas vapor density relative to ambient air (Air = 1.0). Heavy gases (LPG: 1.5–2.0, H₂S: 1.19, Chlorine: 2.45, CO₂: 1.52) sink and must be mounted 30 cm to 60 cm above floor level. Lighter-than-air gases (Methane: 0.55, Hydrogen: 0.07, Ammonia: 0.59) rise and must be installed within 30 cm of the ceiling or directly above high-risk leak flanges.
How often do fixed gas transmitters require field calibration and sensor testing?
Electrochemical toxic sensors require calibration verification every 3 to 6 months. Catalytic pellistors require calibration every 3 to 6 months depending on process severity. Non-Dispersive Infrared (NDIR) hydrocarbon transmitters feature optical auto-zeroing and typically require span verification once every 12 months.
Have a specific project or hazardous area specification?
Our senior instrumentation engineers provide detector grid mapping, gas dispersion guidance, and turnkey BOQ estimates.