Anchorage
PRODUCT DESCRIPTION
Detection Technology introduces the Fixed anchor, specifically designed to be fix on walls, Ceilings, Roof Tops, or Steel Structures
The Anchorage provided by its eye-bolt has been tested to withstand the required load of 23kN from all the 3 axis, and hence provides the highest level of safety.
Can be used with Chemical as well as Mechanical Nut bolt fastener in pre-defined hole of dia 11mm or 13mm through a drilling depth of 95mm.
USP - FA01
⇒ Material : Stainless Steel 316
⇒ Weight : 99.6 gms
⇒ Min. Breaking Strength : 23kN
⇒ Finish : Electro Polished
⇒ EN 795:2012 Type A
USP - FA02
⇒ Material : Stainless Steel 316
⇒ Weight : 48.7 gms
⇒ Min. Breaking Strength : 13kN
⇒ Finish : Electro Polished
⇒ EN 795:2012 Type A
USP - FA03
⇒ Material : Stainless Steel 316
⇒ Weight : 70.5 gms
⇒ Min. Breaking Strength : 13kN
⇒ Finish : Electro Polished
EN 795:2012 Type A
Steel Structure Anchorage - USP - SA01
Steel anchor designed to be fixed on steel structure as well as fixed on concrete pillar, wall with the help chemical fastener.
⇒ Minimum Flange Width : 100mm
⇒ Maximum Flange Width : 200mm
⇒ Material : Stainless steel SS316 and galvanized steel.
⇒ Minimum Breaking Strength : 15kn
⇒ Confirm to : EN795 : 2012 Type - A TS16415 : 2013
Steel Structure Anchorage - USP - SA02
Steel anchor designed to be fixed on steel structure as well as fixed on concrete pillar, wall with the help chemical fastener.
⇒ Minimum Flange Width : 100mm
⇒ Maximum Flange Width : 200mm
⇒ Material : Stainless steel SS316 and galvanized steel.
⇒ Minimum Breaking Strength : 15kn
⇒ Confirm to : EN795 : 2012 Type - A TS16415 : 2013
Steel Structure Anchorage - USP - SA03
Steel anchor designed to be fixed on steel structure as well as fixed on concrete pillar, wall with the help chemical fastener.
⇒ Minimum Flange Width : 100mm
⇒ Maximum Flange Width : 200mm
⇒ Material : Stainless steel SS316 and galvanized steel.
⇒ Minimum Breaking Strength : 15kn
⇒ Confirm to : EN795 : 2012 Type - A TS16415 : 2013
Steel Structure Anchorage - USP - SA04
Steel anchor designed to be fixed on steel structure as well as fixed on concrete pillar, wall with the help chemical fastener.
⇒ Minimum Flange Width : 100mm
⇒ Maximum Flange Width : 200mm
⇒ Material : Stainless steel SS316 and galvanized steel.
⇒ Minimum Breaking Strength : 15kn
⇒ Confirm to : EN795 : 2012 Type - A TS16415 : 2013
Profile Sheet Anchor Post (E)
USP-11000(08)EA
The width of the base of this Post extremity has an adjustable opening allowing to adopt to any type of the roof. Series of precision cut holes allows it to fit properly on trapezoidal roofs having sheets of different pitch/rib. Along with this, an anchorage eye provides universal connection and can be used as an anchorage point.
⇒ Material : SS Grade 316
⇒ Finish : Electro Polished
⇒ Min. Breaking Strength : 15kn
⇒ Confirm to : EN795:2012 TYPE-A, TS16415:2013
Profile Sheet Intermediate Post (E)
USP-11000(08)EB
This Post Intermediate is installed as Intermediate on horizontal lifelines to be fixed on trapezoidal roof tops. Series of precision cut holes on the base plate allows it to fit properly on trapezoidal roofs having sheets of different pitch/rib.
⇒ Material : SS Grade 316
⇒ Finish : Electro Polished
⇒ Minimum Breaking Strength : 15kn
⇒ Confirm to : EN795:2012 TYPE-A, TS16415:2013
Profile Sheet Corner Post (E)
USP-11000(03)EA
This Post allows the horizontal life line systems to be installed at a curve of 90 on a trapezoidal roof. Series of precision cut holes on the base plate allows it to fit properly on trapezoidal roofs having sheets of different pitch/rib.
⇒ Material : SS Grade 316
⇒ Finish : Electro Polished
⇒ Minimum Breaking Strength : 15kn
⇒ Confirm to : EN795:2012 TYPE-A, TS16415:2013
Profile Sheet Anchor Post
USP-11000(08)A
This extremity allows the horizontal lifeline to be fixed on galvolume or trapezoidal roof tops. It is installed at the end of the horizontal life lines making the post adjustable and allowing installation on roof sheets having different pitch or rib.
⇒ Material : SS Grade 316
⇒ Finish : Electro Polished
⇒ Minimum Breaking Strength : 15kn
⇒ Confirm to : EN795:2012 TYPE-A, TS16415:2013
Profile Sheet Intermediate Post
USP-11000(08)B4
This extremity allows the horizontal lifeline to be fixed on trapezoidal roof tops. It is installed as intermediates of the horizontal life lines making the post adjustable and allowing installation on roof sheets having different pitch or rib.
⇒ Material : SS Grade 316
⇒ Finish : Electro Polished
⇒ Minimum Breaking Strength : 15kn
⇒ Confirm to : EN795:2012 TYPE-A, TS16415:2013
Profile Sheet Corner Post
USP-11000(03)A
This Post allows the horizontal life line systems to be installed at a curve of 90 on a trapezoidal roof. Series of precision cut holes on the base plate allows it to fit properly on trapezoidal roofs having sheets of different pitch/rib.
⇒ Material : SS Grade 316
⇒ Finish : Electro Polished
⇒ Minimum Breaking Strength : 15kn
⇒ Confirm to : EN795:2012 TYPE-A, TS16415:2013
Standing Seam Anchor Post (E)
USP-11000(08)EC
This extremity allows the horizontal lifeline to be fixed on standing seam roof tops. It is installed at the end of the horizontal life lines making the post adjustable and allowing installation on roof sheets having different seam distances. This extremity can easily handle a distance of 250mm to 350mm.
⇒ Material : SS Grade 316
⇒ Finish : Electro Polished
⇒ Minimum Breaking Strength : 15kn
⇒ Confirm to : EN795:2012 TYPE-A, TS16415:2013
Standing Seam Intermediate Post (E)
USP-11000(08)ED
This intermediate post allows the horizontal lifeline to be fixed on standing seam roof tops. It is installed as intermediate on the horizontal life lines making the post adjustable and allowing installation on roof sheets having different seam distances.
⇒ Material : SS Grade 316
⇒ Finish : Electro Polished
⇒ Minimum Breaking Strength : 15kn
⇒ Confirm to : EN795:2012 TYPE-A, TS16415:2013
Standing Seam Corner Post (E)
USP-11000(03)EB
This Post allows the horizontal life line systems to be installed at a curve of 90 on a standing seam roof. Series of precision cut holes on the base plate allows it to fit properly on a standing seam roof having a distance between 250mm to 350mm.
⇒ Material : SS Grade 316
⇒ Finish : Electro Polished
⇒ Minimum Breaking Strength : 15kn
⇒ Confirm to : EN795:2012 TYPE-A, TS16415:2013
Standing Seam Anchor Post
USP-11000(08)C
This extremity allows the horizontal lifeline to be fixed on standing seam roof tops. It is installed at the end of the horizontal life lines making the post adjustable and allowing installation on roof sheets having different seam distances. This extremity can easily handle a distance of 150mm to 350mm.
⇒ Material : SS Grade 316
⇒ Finish : Electro Polished
⇒ Minimum Breaking Strength : 15kn
⇒ Confirm to : EN795:2012 TYPE-A, TS16415:2013
Standing Seam Intermediate Post USP-11000(08)D
This intermediate post allows the horizontal lifeline to be fixed on standing seam roof tops. It is installed as intermediate on the horizontal life lines making the post adjustable and allowing installation on roof sheets having different seam distances. This extremity can easily handle a distance of 150mm to 350mm.
⇒ Material : SS Grade 316
⇒ Finish : Electro Polished
⇒ Minimum Breaking Strength : 15kn
⇒ Confirm to : EN795:2012 TYPE-A, TS16415:2013
Standing Seam Corner Post
USP-11000(03)B
This Post allows the horizontal life line systems to be installed at a curve of 90 on a standing seam roof. Series of precision cut holes on the base plate allows it to fit properly on a standing seam roof having a distance between 250mm to 350mm.
⇒ Material : SS Grade 316
⇒ Finish : Electro Polished
⇒ Minimum Breaking Strength : 15kn
⇒ Confirm to : EN795:2012 TYPE-A, TS16415:2013
USP-12000(03)A
Corner Brackets are used to install on external bend for a wall mounted lifeline.
⇒ Material : SS Grade 316
⇒ Finish : Electro Polished
⇒ Minimum Breaking Strength : 15kn
⇒ Confirm to : EN795:2012 TYPE-A, TS16415:2013
USP-12000(03)B
Corner Brackets are used to install on internal bend for a wall mounted lifeline
⇒ Material : SS Grade 316
⇒ Finish : Electro Polished
⇒ Minimum Breaking Strength : 15kn
⇒ Confirm to : EN795:2012 TYPE-A, TS16415:2013
Profile Sheet Corner Post (E)
USP-11000(03)EA
This Post allows the horizontal life line systems to be installed at a curve of 90 on a trapezoidal roof. Series of precision cut holes on the base plate allows it to fit properly on trapezoidal roofs having sheets of different pitch/rib.
⇒ Material : SS Grade 316
⇒ Finish : Electro Polished
⇒ Minimum Breaking Strength : 15kn
⇒ Confirm to : EN795:2012 TYPE-A, TS16415:2013
Profile Sheet Corner Post
USP-11000(03)A
This Post allows the horizontal life line systems to be installed at a curve of 90 on a trapezoidal roof. Series of precision cut holes on the base plate allows it to fit properly on trapezoidal roofs having sheets of different pitch/rib.
⇒ Material : SS Grade 316
⇒ Finish : Electro Polished
⇒ Minimum Breaking Strength : 15kn
⇒ Confirm to : EN795:2012 TYPE-A, TS16415:2013
Standing Seam Corner Post (E)
USP-11000(03)EB
This Post allows the horizontal life line systems to be installed at a curve of 90 on a standing seam roof. Series of precision cut holes on the base plate allows it to fit properly on a standing seam roof having a distance between 250mm to 350mm.
⇒ Material : SS Grade 316
⇒ Finish : Electro Polished
⇒ Minimum Breaking Strength : 15kn
⇒ Confirm to : EN795:2012 TYPE-A, TS16415:2013
Standing Seam Corner Post
USP-11000(03)B
This Post allows the horizontal life line systems to be installed at a curve of 90 on a standing seam roof. Series of precision cut holes on the base plate allows it to fit properly on a standing seam roof having a distance between 250mm to 350mm.
⇒ Material : SS Grade 316
⇒ Finish : Electro Polished
⇒ Minimum Breaking Strength : 15kn
⇒ Confirm to : EN795:2012 TYPE-A, TS16415:2013